Electrician checking inside an opened fuse board

Round-the-clock call out electricians

Lost Power and Tripping Fuses in Guildford

Lost your power, or does the fuse board trip every time you reset it? We work out the reason and get your electricity back on safely.

  • Power lost across the whole house or just part of it
  • Fuse board switches that refuse to reset
  • Here within 30 to 90 minutes
  • You'll know the price before work begins
Call 01483 000000

Why it happens

What makes the power fail

There are only a few usual reasons for a loss of power. We work through them one by one until we reach yours.

Main switch or RCD tripped

A single fault may knock out the entire house. We track down the guilty circuit and bring the others back on.

Appliance faults

A kettle, oven or washing machine on its way out can cut the power each time you switch it on.

Circuit overload

Putting too many power-hungry appliances on one circuit will make it trip. We assess the load and recommend a remedy.

Worn-out fuse board components

Breakers, RCDs and main switches don't last forever. We swap out the ones that have failed so the board protects you properly again.

Moisture getting in

Rain, leaks and condensation inside outdoor fittings often set off trips.

Problems with the supply

Now and then the fault lies with the network rather than your property. We confirm that and point you to the right people.

Call 01483 000000Open 24/7 • Here within 30 to 90 minutes

About the fault

Understanding power loss and tripping

If your power cuts out, it's either because the protective devices in your fuse board have done their job or because the supply itself has failed. Working out which, and why, is how we get you safely back on.

What's happening

Several kinds of protection sit inside your fuse board. Circuit breakers (MCBs) cut the power if a circuit pulls too much current or suffers a short circuit. RCDs cut it when current leaks to earth, as happens when somebody gets a shock or water finds its way into a fitting. Older properties may still have rewireable fuses, which melt instead of tripping.

Where one RCD protects several circuits, one fault can leave half the house dark. A tripped main switch or main RCD may take out everything. Occasionally the trouble isn't in your home at all, but is a network power cut or a fault on the incoming supply.

Usual culprits

  • Leakage to earthCurrent straying to earth via damp, damaged insulation or a faulty appliance will trip the RCD.
  • Too much loadUsing several high-power appliances together on a single circuit trips its breaker.
  • Short circuitsWhen live and neutral touch, because of a damaged cable or a failed appliance, the breaker trips at once.
  • Protective device failureBreakers and RCDs can wear out, then trip without cause or refuse to reset.
  • Small leaks that add upMany appliances each leaking a little current can together be enough to trip a shared RCD.
  • Network supply faultsYour network operator has to deal with a network outage or a fault on the incoming supply. Ring 105 to report it.

How we put it right

Our first step is to check whether the supply is actually reaching your property. If not, we'll say who to contact. If it is, we isolate the circuits one at a time to pinpoint the one causing the trip, and switch the healthy circuits back on so you have power while we carry on.

On the circuit at fault, we run an insulation resistance test to look for leakage, check for overload with a clamp meter, and test the breaker or RCD to see if it trips as it should. The fix could mean replacing a damaged accessory, repairing a cable, rebalancing an overloaded circuit or fitting a new device. We retest everything before the circuit is switched back on.

Call 01483 000000Noticed any of these signs? Ring us immediately.

Do this first

Quick checks before you ring

You can do these checks safely yourself, and they may spare you a callout.

  1. Ask a neighbour

    If they've lost power as well, it's a power cut. Ring 105 to report it.

  2. Inspect the fuse board

    Spot which switch has dropped. Never force a switch that won't stay up.

  3. Unplug, then reset once

    Pull the plugs of appliances on that circuit and flip the switch back once. If it drops again, leave it off.

  4. Ring us

    If power won't stay on, or you notice scorch marks or a burning smell, ring 01483 000000.

Call 01483 000000Open 24/7 • Here within 30 to 90 minutes

Electrical emergency happening now?

Day or night, we reach you within 30 to 90 minutes.

Call 01483 000000

Total power loss

Power cut, tripped switch or a fuse box that keeps tripping

The same problem gets described in many ways: no electricity, a power cut, half the house with no power, a tripped trip switch, a fuse box that keeps tripping, or an RCD that won't reset. Each one means the power is off and you want to know the reason.

When the whole street is off, that's a network power cut and 105 is the number to ring. If only your property is affected, a fault has usually tripped your MCB, RCD or main switch. Our emergency electricians in Guildford identify the circuit responsible and restore the rest of your electricity while we deal with the fault.

A call out electrician for a tripping fuse box at night, an out of hours electrician for a complete loss of power, or a same day electrician for a breaker that keeps tripping: we cover Guildford and the surrounding villages 24/7.

Call 01483 000000Open 24/7 • Here within 30 to 90 minutes

Your questions

Common questions answered

Can I keep resetting a switch that has tripped?

No. A switch that drops again immediately points to a fault. Resetting it over and over can make matters worse, so leave it off and give us a call.

Why is only half of my house without power?

A single circuit, or one side of the fuse board, has tripped. It does need checking, though the rest can normally be used safely in the meantime.

How do I tell a power cut from a fault in my home?

If the neighbours have lost power too, it's a power cut, so ring 105. If it's just you, the likelier cause is a fault in your own installation.

Will I have to replace my fuse board?

Not necessarily. A single component has often failed and can be swapped. Where the board is old or damaged, we'll talk you through your options.

Call 01483 000000Still not sure? Ring us, day or night.